Sheet laser cutting machine components need to be installed correctly to play its role, which is one of the regulator is a very critical component. Many people do not know how to be the correct installation, for how to properly install the thin plate laser cutting machine regulator this issue we consulted a professional manufacturer to see how they are installed it!
We install the regulator in the thin plate laser cutting machine before the regulator, be sure to blow clean the pipeline of dust, oil and other tiny particles, while sealing material fragments must be prevented from mixing into it;.
If the working environment is heavy with moisture, it may cause condensation, condensation remains in the valve, will affect the operating conditions that cause the pressure reducing valve, so we should try to install the handle below, to facilitate timely control; import and export direction shall not be installed in reverse, otherwise the pressure reducing valve will leak for a long time and lose the regulating function; two pressure reducing valves to do alternating high and low pressure into the circuit, please use a check valve to prevent backflow; import side pressure pipeline if there is condensate, oil, dust, etc. will cause the normal drain hole or throttle hole blockage, so that the regulator effect is affected, so the front of the pressure reducing valve should be installed with a filter to prevent dust, oil, etc.; at the same time should be used within a certain temperature range, beyond the temperature is bound to have damage, and should avoid direct sunlight, bringing damage; thin plate laser cutting machine should be left around the appropriate space for regulating operation and maintenance; regulating operation is completed after the pressure reducing valve adjustment button should be locked.
At the same time, the thin plate laser cutting machine should be used within a certain temperature range, beyond the temperature is bound to have damage, and should avoid direct sunlight, bringing damage. All around should leave a suitable space for regulating operation and maintenance; regulator adjustment button should be locked after the regulating operation is completed. The regulator will be able to get the best maintenance, so that it can play its maximum effectiveness, more auxiliary laser cutting machine to play the maximum role in improving cutting efficiency.
